Strong SRT6130 Retune

srt6155

1. Turn on the box and press the Menu button on the remote.

6155main

2. Use the arrow keys to select Installation and press OK.

NB. A PIN number may be requested during the following procedures – it is usually “0000″ or “1234″.

6155inst

3. Use the arrow keys to select Channel Set-up and press OK.

6155sca1

4. Use the up/down keys to select Frequency and press OK to show the transponder list. Use the arrow keys to select the required transponder and press OK. If the required transponder is not listed press the green key (Add), enter the frequency, symbol rate and polarization manually and press the yellow (Save) key. When the required transponder has been selected press the yellow key (Tp. Scan). Repeat for other required transponders.

To re-order the channel list:

5. Go back to the Main Menu as in fig. 1 above. Select Channel Organizer and press OK.

6155chan

6. To delete a channel highlight it using the arrow keys, press the blue key (Delete), press the red key (Del One), select Yes then pressOK. Repeat for all unwanted channels. Press BACK to go back to the screen in fig. 5.

To move channels press the red key (Sort) once. WARNING if the red key is pressed twice the channels will be re-orded alphabetically – there is no undo facility. Use the arrow keys to highlight the channel to be moved and press the blue key (Manual) – a tick will appear next to the channel name. Use the arrow keys to move the highlight to the required position and press the blue key (Manual) again. Repeat as necessary.

To re-order the radio channel list press the TV/Rad key and repeat the procedure above.