Strong SRT6015 Retune

srt6015

NB. A PIN number may be requested during the following procedures – it is usually “0000″ or “1234″.

  • Turn on the box and press the Menu button on the remote. The following screen appears…

6015main

  • Use the arrow keys to select Installation and press OK on the remote.

6015inst

  • Use the arrow keys to select Manual Scan and press OK.

6015scan

  • Use the arrow keys to select the required transponder. If the required transponder is not listed press the Add key (green), enter the frequency, symbol rate and polarization manually and press the Save key. Press OK to scan the selected transponder. After the transponder has been scanned the full screen TV picture will re-appear. Repeat steps 1-4 with any other required frequencies.

To re-order the channel list:

  • Go back to the Main Menu as in the first image above. Select Channel Organizer and press OK.

6015cha1

  • Select Channel Manager and press OK.

6015cha2

  • To delete channels use the arrow keys to move to the Del column corresponding to the channel for deletion and press OK – a X will appear in the box. Repeat with all other channels to be deleted. Press OK again to remove the X from channels selected by mistake.


There are two methods for moving channels. Use the arrow keys to move to the Move column corresponding to the required channel, then either a) press OK to select the channel and use the up/down keys to move it to the required position, then press OK again; or b) type the required position into the box and press OK.

Press EXIT, if any channels were selected for deletion a confirmation prompt will appear, use the left/right keys to select Yes and press OK.

To edit the radio channel list go the Installation as above then press the TV/R key, then continue on from the Manual Scan Page.